Vertical Hydraupulper, mainly used for breaking pulp board,damage paper, waste paper and etc. Before installation, there some points should be paid attention.

The axial sealing of the main driving part of Vertical Hydraulic pulper is composed of packing box, water ring, packing and pressure cap. In order to avoid shaft wear, wear-resistant material sleeve is installed at the part of the shaft passing through the packing chamber. When running, the packing chamber should be filled with pressure level 0. 1-0. 2 Mpa lubrication cooling water, packing tightness is appropriate to drop about 5 drops per minute, the lower part of the packing chamber is equipped with a water catcher, the dripping water will be centrally discharged. In the triangular belt drive part, the conical bushing structure is adopted to connect the internal control of the motor groove wheel and the large groove wheel with the shaft. It is very convenient to install and disassemble.There are two types of equipment, intermittent and continuous. The difference in structure is that there are continuous Headbox and intermittent Headbox. The function of Headbox is to keep a certain level in the groove body. Before the installation work begins, the base of the Pulper must be poured in accordance with the general layout and basic drawing of the design institute.

We can supply you this advanced and good Vertical Hydraupulper with relatively cheap price. Welcome to contact us for more benefits and quotation.
Email: flutingpapermachine@gmail.com

Click here to Request A Quote or call us at 86-371-55129198