MenuClose
The control system of the Inflow Pressure screen is used in front of the wire. It consists of screen body, slurry tank connected with the inlet of screen body through slurry pump, slurry dilution valve set in the slurry inlet pipeline before pulp pump and slurry concentration meter, slurry inlet valve, slurry pressure meter and slurry flowmeter set in the slurry inlet pipeline after pulp pump are connected with PLC control device respectively. The fine pulp pressure gauge and valve installed in the fine pulp output pipeline, the tail pulp flowmeter and the tail pulp valve installed in the tail pulp output pipeline of the front screen body and the dilution water valve connected in the dilution pipeline on the side of the front screen body are respectively connected with the PLC control device, and are connected with the rotating shaft at the bottom of the front screen body. An ammeter is connected to the circuit of the motor, and the ammeter is connected to the PLC control device. The utility model has the advantages of simple operation, high automation, low failure rate, accurate control, reduced waste and saved production cost.
leizhan can provide you more advanced and high-quality Inflow Pressure Screen with competitive price. Welcome to contact us for more benefits and quotation.
Email: flutingpapermachine@gmail.com